First Kumac Plant in Germany Goes Live
Every day, the biogas plant feeds 12,000 kWh of electricity into the public grid. In addition, the plant supplies up to 500 kW of heat to small consumers and to the site of the former Paracelsus Clinic in Reichenbach via a heating network. The plant‘s main business consists of the delivery of biogas via a 3.2-km raw biogas pipeline to the heating plant of Stadtwerke Reichenbach for the base load supply of flats and social facilities. The amount of electricity generated each year corresponds to the annual consumption of around 6,000 private households.
Tried-and-Tested, Fine-Tuned Processes
Within the scope of the Leipzig Biogas Expert Talks, Deutsche Biomasseforschungszentrum gemeinnützige GmbH (DBFZ) had already invited visitors to the Application Day in Reichenbach in December 2023. The numerous professional visitors made use of the opportunity to visit the biogas plant as well as the digestate processing plant of WELTEC BIOPOWER. The introduction of modern technologies and systems such as the Kumac system greatly contributes to the recycling of nutrients and the conversion of liquid manure into compost, fertiliser, animal bedding or biogas substrate. For the conversion, Kumac makes use of tried-and-tested processes that are fine-tuned to each other.
High-Quality Fertiliser for Plant Cultivation
„In Reichenbach, the output of the Kumac process consists of around 25 percent solid and 20 percent liquid farm manure and 55 percent dischargeable water. The resulting solid matter and the nutrient concentrate are applied as organic, high-quality fertiliser to our own crops. In this way, long transport routes are avoided,“ explains Lars Bittermann, Managing Director of Agrar Reichenbach GmbH. „This closes an efficient material flow cycle, and the individual areas of our portfolio interlock perfectly. From the cultivation of feed crops to dairy farming to the utilisation of the liquid manure in the biogas plant and the processing of digestate into fertiliser and water, all components have their place.“
Dry Matter Content: 30 Percent
In the first step of the liquid manure and digestate treatment, flocculants are added to the source material. These additives ensure flocculation of even the finest components, facilitating the separation from the water. At the same time, they contribute to the reduction of odour emissions. After the material has been squeezed through a belt press via various rollers against a second, water-permeable belt, the solid material can be used directly as fertiliser, compost, animal bedding or biogas substrate with a dry matter content of up to 30 percent.
One Quarter of the Original Volume
Subsequently, the liquid phase is passed through a tank in which small particles and suspended solids are separated. Any remaining solid particles are removed by means of a fine filter. In the next step, the filtrate traverses a three-stage reverse osmosis process to remove salts and nutrients. The resulting liquid fertiliser is rich in nitrogen and merely accounts for one quarter of the original volume. Clear water accounts for the greatest share of the treatment products and is currently discharged into the receiving water.
Support from the European Agricultural Fund
The scalable modular system can be used from an amount of 70,000 t of liquid manure or digestate a year. Should the processing needs increase, several Kumac lines can easily be combined. „The processing here is almost fully automated, which also minimises the amount of personnel required“, says Managing Director Lars Bittermann. „By the way: Operators who decide to set up a system can receive funding from the European Agricultural
