Search
Close this search box.

Gemmecotti ATEX Pumps: The EM Series

Gemmecotti ATEX Pumps: The EM Series
28 Jul 2021  |
GemmeCotti supplies ATEX pumps for potentially explosive atmospheres. Our EM pumps are suitable to be used in ZONE 1 II2G and ZONE 2 II3G classified areas. All our pumps comply with the technical and safety requirements of ATEX Directive 2014/34/EU.

The Directive states that the manufacturers of equipment intended for use in potentially explosive atmospheres shall draw up a written declaration of conformity of these products.

How are the ATEX zones classified?

The term “ZONE 1” indicates an area where an explosive atmosphere consisting of a mixture of air or flammable substances (gas, vapour or mist) is likely to occur in normal operation occasionally.

The term “ZONE 2” indicates an area where an explosive atmosphere consisting of a mixture of air and flammable substances (gas, vapour or mist) is not likely to occur in normal operation. If it does occur, it will persist for a short period only.

What does Gemmecotti offer for potentially explosive atmospheres?

GemmeCotti ATEX pumps for potentially explosive atmospheres EM series includes 3 metallic pumps (AISI 316) and 5 plastic pumps (PP/PVDF).

ATEX pumps made of stainless steel AISI 316 suitable for atex zone 1 II2G and zone II3G:

  • EM-C Atex centrifugal mag drive pumps:
    Max flow 32 m3/h, max head 24 mlc
  • EM-P Atex rotary vane mag drive pumps:
    Max Flow 2100 l/h, max head 13 bar
  • EM-T Atex turbine mag drive pumps:
    Max Flow 7 m3/h, max head 78 mlc

ATEX pumps made of stainless steel AISI 316 suitable for ATEX zone 1 II2G and zone 2 II3G

  • EM-C PP-PVDF Atex centrifugal mag drive pumps:
    Flow up to 130 m3/h, head up to 48 mlc
  • EM-T PP-PVDF Atex turbine mag drive pumps:
    Max capacity: 9 m3/h, max head: 50 mlc
  • EM-P PP-PVDF Atex vane mag drive pumps:
    Max flow: 1000 l/h, max pressure 5 bar
  • EM-T SP Atex turbine self-priming pumps:
    Max flow: 6 m3/h, max head 24 mlc
  • EM-CO Atex mechanical seal pump:
    Flow up to 58 m3/h, head up to 38 mlc

All these pumps are suitable to transfer:

  • Acids and bases
  • Corrosive, toxic and dangerous liquids
  • Hydrocarbons, pyrophorics and other flammables
  • Heat transfer oils
  • Refrigerants and cryogenics
  • Radioactive liquids

Our ATEX pumps are suitable for various applications and they are supplied with the ATEX certificate for ATEX ZONE 1 and 2.

You should specify the ATEX zone in your enquiry, our sales office will select the right pump according to your requirements.

All the pumps include the required protective systems.

Share this article

This article is published by

GemmeCotti has been producing chemical pumps for acids and dangerous liquids since 1992, when its founders, Enrico Gemme and Marino Cotti, started their own company after considerable experience on pump design and production. The company...

Related Articles