According to Landia, its pumps and mixers have served a paper mill in Skjern, Denmark, now part of Sonoco, for 40 years. The mill runs 19 Landia units, including mixers and submersible, dry-installed and long-shaft pumps, in wastewater treatment and pulp handling. One unit has been in reliable working order since 1992, and a long-shaft pump is swapped for a spare and serviced approximately every six months.
First Landia Mixer Installed in 1987

The first Landia mixer to be installed at the paper mill (established in 1965 – now part of Sonoco) was in 1987, with one unit still in reliable working order since it was introduced to the mill in 1992.
19 Pumps and Mixers at the Skjern Facility

One of 19 pieces of equipment at the Skjern facility, the Landia range includes eight mixers, five submersible pumps, four dry-installed pumps, and two long-shaft pumps (all Chopper Pumps). One of the long-shaft pumps works in a particularly demanding application at the mill, which produces recycled paper for the packaging industry. Approximately every six months, the mill swaps the pump in for spare, with the unit that has been in operation returned to Landia for a full service.
Equipment That Runs by Itself
It just works. We do not have to think about it in our daily operations, and at the same time, we have service close at hand.
Anders NielsenSonoco
Anders Nielsen from Sonoco, commented:
“We hardly touch the Landia equipment. It just runs by itself, without any problems.”
Service Technician on Site Since 2012
The close relationship with the paper mill, which has been built up over many years, has seen, for example, Landia’s service technician, Jorgen Ejvind, maintaining pumps and mixers there since 2012.
“The Landia team just come in and get on with the job,” continued Anders Nielsen from Sonoco.
“They know exactly what we need and where the equipment is located. We hardly touch the pumps and mixers. They run by themselves, without any problems.”
Keeping Pulp and Process Water Moving
FAQ – compiled by the Fluid Handling Pro editors
How long has Landia equipment been in service at the paper mill in Skjern?
According to Landia, the first Landia mixer was installed at the mill in 1987, and one unit introduced in 1992 is still in reliable working order.
Which Landia equipment does the paper mill use?
The Skjern facility has 19 pieces of Landia equipment: eight mixers, five submersible pumps, four dry-installed pumps and two long-shaft pumps. According to Landia, the pumps are all Chopper Pumps.
What do the pumps and mixers do at the mill?
The mixers keep pulp moving in the tanks so that it does not settle. The long-shaft pumps keep the recycled process water moving, and the submersible pumps transfer hot pulp and other media around the production facility.
Editor’s summary, FAQ and links by the Fluid Handling Pro editors. The article text is by Landia.
The Landia mixers keep pulp moving in the tanks, preventing it from settling. Meanwhile, the long-shaft pumps also keep the recycled process water moving, and the five submersible pumps transfer hot pulp and other media around the production facility.
All sorts of solids find their way into the wastepaper stream, but despite this having recently included a pair of jeans and a traffic cone (!), the robustness of the Landia equipment has ensured that the paper mill’s production has not been interrupted.















