AdvertiseSubscribe

Aalberts IPS Highlights Valves Supporting Efficient, Water-Responsible Liquid Cooling for Biotechnology and Pharmaceutical Manufacturing

Stainless steel Apollo ball valve with yellow lever handle welded to a pipe extension in an industrial facility
17 Nov 2026  |
Aalberts integrated piping systems Americas (IPSA), a global leader in advanced integrated piping systems for the distribution and control of liquids and gases, highlights its “Apollo”® Valves solutions that support efficient, reliable and water-responsible liquid cooling in biotechnology and pharmaceutical applications. Aalberts IPS’ custom valve solutions combine full-port flow, corrosion resistant materials, factory-engineered extensions, protected connections and tested performance to support long-term liquid cooling service. In biotechnology and pharmaceutical manufacturing, where precision is critical, “Apollo”® Valves provide exact control from autoclave systems to effluent treatment, helping safeguard critical processes and product integrity.

Factory tested “Apollo”® Valves solutions help mission-critical cooling systems reduce installation complexity, leakage risk and unnecessary material use

“Apollo”® Valves100% tested before shipmentrepaired in-linezero leakage required to pass testing
Editor’s summary
  • Factory-Welded ExtensionsAccording to Aalberts IPS, the 76F Series ball valve with welded pipe extensions is 100% tested before shipment and reduces field welding.
  • In-Line RepairThe 86B-100 Series three-piece valve has a swing-out center section, so internal components can be serviced in-line.
  • Flow Control OptionsV-port control valve options based on the 83B, 84B, 85B and 86B Series are available in carbon or stainless steel.

Welded Pipe Extensions Simplify Installation and Protect Valve Components

The “Apollo”® Valves 76F Series ball valve with welded pipe extensions helps simplify installation while protecting critical valve components. The factory-prepared welded assembly is 100% tested before shipment to verify valve, weld, seal and assembly integrity. By moving welding farther from the valve body, the pipe extensions help protect seats, seals and other soft goods from excessive welding heat that can cause damage, create rework needs and require replacement parts.

Less Field Welding and Fewer Potential Leak Paths

Factory-engineered extensions also reduce the amount of field welding and the number of field-fabricated connections, helping minimize potential leak paths and installation variables. This approach can lower field labor requirements, speed installation and support consistent system quality for high volume projects and demanding construction schedules.

In-Line Repair Extends Valve Service Life

For biotechnology and pharmaceutical cooling systems requiring maintainability and durable flow control, the “Apollo”® Valves 86B-100 Series stainless steel three-piece full port ball valve features a swing-out center section that can be repaired in-line. Rather than removing and replacing the complete valve assembly, users can service internal components, extending valve service life and reducing material consumption, waste and emissions associated with manufacturing and transporting a replacement valve.

Full-Port Flow and Factory Leak Testing

The “Apollo”® Valves 86B Series combines full-port flow with:

  • Stainless steel trim and hardware
  • Enclosed fasteners
  • A pressure-balanced solid ball
  • Compression-controlled spiral wound gaskets
  • An anti-blowout one piece bottom entry stem

All Aalberts IPS valves are leak tested before leaving the factory, with zero leakage required to pass testing.

FAQ – compiled by the Fluid Handling Pro editors

Why do the 76F Series ball valves have welded pipe extensions?

According to Aalberts IPS, the extensions move welding farther from the valve body, which helps protect seats, seals and other soft goods from excessive welding heat. They also reduce the amount of field welding and the number of field-fabricated connections.

Can the 86B-100 Series valve be serviced without removing it from the line?

Yes. The three-piece full port ball valve has a swing-out center section that can be repaired in-line, so internal components can be serviced instead of replacing the complete valve assembly.

How are the valves tested before shipment?

According to Aalberts IPS, all its valves are leak tested before leaving the factory, with zero leakage required to pass testing. The 76F welded assembly is 100 percent tested to verify valve, weld, seal and assembly integrity.

Editor’s summary, FAQ and links by the Fluid Handling Pro editors. The article text is by Aalberts IPS.

V-Port Control Valve Options for Precise Flow Control

Aalberts IPS also offers “Apollo”® Valves V-port control valve options based on its 83B, 84B, 85B and 86B Series three-piece designs. Available in carbon or stainless steel with characterized ball options including 1/16-inch slot, 30-degree, 60-degree and 90-degree ports, the V-port series provides flexible flow control capability for liquid cooling applications requiring precision and dependable operation.

Share this article

This article is published by

Aalberts integrated piping systems Americas, Inc. (Aalberts IPS) manufactures mission-critical valve and connection technology under three brands: “Apollo” Valves for valves, VSH for press fittings and connection technology, and Shurjoint for grooved piping products. The...

Related Articles