Whether a large flange, ring, a rope loop or a long rope need to be pressed, the UNIFLEX HMC 5-200 crimper makes this possible ergonomically and efficiently with a pressing force up to 200 tons. Crimping can save processing steps, like welding, screwing or swaging. With this C-crimper (opened at the front), the workpiece can be inserted at any point to be machined and removed again immediately from the side after the process. e.g., a 16-mm steel cable with aluminum sleeve or the 5″ industrial hose with ANSI flange. The machine is available as standard with the modern 12″ touch-screen IPC control from Siemens. This allows the process to be monitored and the machine to be integrated into the network (IoT).
HMC 5-200 the open radial crimper for all requirements
Do you process normal or complicated components, such as an industrial hose with a large flange, rope rings, rope loops, or assemble long ropes with center machining? Then take a look at our new C-crimper. With the UNIFLEX crimper HMC 5-200 everything up to 200 t/2000 kN radial crimp force can be processed ergonomically and efficiently. To save further processing steps, like welding, screwing or swaging the Hoses as crimping is a simple process. The repeatability is assured. Thanks to the 126-mm wide base dies, a large number of cross sections and workpiece lengths can be machined. With this C-crimper (opened at the front), the workpiece can be inserted at any point and immediately removed from the side after the process. e.g., a 16-mm steel cable with aluminum sleeve or the 4″ industrial hose with ANSI flange, 5” layflat hoses. The long opening allows full use of the 155-mm side opening. The machine is available with the modern 12″ touch screen IPC control from Siemens as standard. This allows the process to be monitored and an IT connection enables the further use of the data in the course of production.
website
