AdvertiseSubscribe

Canned Motor Pump for Lyophilisation / Freeze-Drying

Rows of glass vials for pharmaceutical freeze-drying
18 Nov 2026  |
Freeze-drying, also known as lyophilisation, is used in various branches such as pharmaceutics or the food industry to prolong the product life. Hereby the product is cooled down to a temperature between –50 °C and –90 °C in industrial freeze-dryers so that the water in the product is turned into ice.
Application reportMedicine productionDelivery rate: 42 m3/hPumping head: 15 mOperating temperature: –60 °C bis +80 °CCNF50-160 with AGX6.5 motor
  • MaterialMaterial resistance to low temperatures up to –90 °C
  • SafetyAbsolute leak-tightness of the system even when using coolants with high requirements
  • Energy EfficiencyLowest life cycle costs thanks to low maintenance costs

Precise Temperature Control for Freezing and Condensing

Tray of vials being loaded onto the shelves of an industrial freeze-dryer
Image: HERMETIC-Pumpen GmbH

The chamber will be vacuumized afterwards, so that the frozen water evaporates without adopting a liquid aggregate state. The water vapour is separated at an ice condenser which is also heavily cooled. Finally, the product is heated up to remove residual moisture. To do this, a constant, precise temperature control is required both for freezing and for condensing the water vapour. In the primary circuit, a synthetic refrigerant cools the secondary circuit which circulates a silicone oil by means of a pump to cool shelves and the condenser.

Application Areas

Requirements

In this application, the requirement was to select a suitable pump for the secondary circuit of an industrial refrigeration chamber in the field of medicine production. The application temperature range required was –60 °C to +80 °C. The long service life and no-maintenance requirement were also important. The servicing intervals for the pump should be as long as possible.

  • Delivery rate42 m3/h
  • Pumping head15 m
  • Operating temperature–60 °C bis +80 °C
  • RefrigerantSilikonöl KT3
  • MaterialEdelstahl

The Pump Used

Cutaway view of a HERMETIC CNF single-stage canned motor pump in stainless steel
Image: HERMETIC-Pumpen GmbH

The pump is made from stainless steel due to the low operating temperatures. A CNF50-160 with AGX6.5 motor was used. This is a single-stage canned motor pump with a pressure rating of PN25. This single-stage pump series is particularly suitable for high delivery rates and medium pumping heads. The customer was also particularly impressed by the long, maintenance-free service life and HERMETC’s experience in the handling of low temperatures.

Silicone Oil as Medium and Refrigerant

Silicone oils are used as refrigerants especially in the low temperature range. Baysilone KT3, for example, features a low solidification point of < –100 °C, a high thermal stability and low vapour pressures. In addition, the silicone oil is non-corrosive. Silicone oils, however, are very expensive in comparison with other refrigerants.

HERMETIC Pumps for Freeze-Drying

Cutaway view of a HERMETIC CAM multistage canned motor pump in stainless steel
Image: HERMETIC-Pumpen GmbH
  • CAM Stainless SteelDelivery rate: max. 45 m3/h. Pumping head: max. 190 m. Pressure rating: PN 25. Operating temperature: –90 °C to +30 °C. Motor: AGX 1.0 – AGX 6.5. Material: Stainless steel 1.4571
  • CNF Stainless SteelDelivery rate: max. 85 m3/h. Pumping head: max. 90 m. Pressure rating: PN 16 / PN 25. Operating temperature: –90 °C to +30 °C. Motor: AGX 3.0 – CKPx 19.0. Material: Stainless steel 1.4408

Customisation

If you cannot find a suitable pump series? We are happy to help you with a customised solution regardless of the quantity. Please contact us for further information.

Share this article

This article is published by

HERMETIC-Pumpen GmbH is a leading developer and manufacturer of hermetically sealed pumps and pumping technologies. The specialist for canned motor pumps has earned a worldwide reputation for its safe and long-lasting pumps, which can be...

Related Articles