Duty Point: Let us assume a duty point required of 170m3/hr at a head of 36m. Shown as the red lines.
Flow can be read from the horizontal (X) axis.
Head is read from the vertical (Y) axis.
Impeller Trim: In this case three impeller trims are shown; 210 mm, 200mm and 190mm diameters.
Efficiency: We can see that the duty point sits very nicely at the at the BEP (Best Efficiency Point). Unless there are exceptional circumstances the pump should be selected at a point between 70% and 120% of its BEP.
NPSHr (Nett Positive Suction Head required): Reading down the vertical line we can see that the pump at this point requires an NPSH of 3m. Generally speaking, NPSHr curves do not vary much between impeller trims which is why we see only one NPSHr curve although tree sizes of impellers are indicated on the curve.
Power Required: reading further down the vertical axis we can read the pump requires a power of 37.5 kw at the duty point (210mm impeller). The motor should take into account potential variations in the duty point so it is common practice to select the motor power for end of curve conditions.
Shut Off Head: The performance curve will also show the maximum head the pump can achieve at closed valve conditions. In this example we can read that the shut off head for a 210mm impeller is 55 metres.
Tombstone or Composite Curves: are produced as a guide to see the performance of a complete range of pumps. They are very simple in their format and used only to see which particular pump will suit the duty required and specific details can only be found on the individual pump performance curve.
