Flow Control and Measurement • Manufacturers Directory for Fluids

Recommended manufacturers

Ryan Fitzgerald

Anderson-Negele

Ask a question

Ryan Fitzgerald, Product Manager at Anderson-Negele, is an expert for the process management sensor portfolio which includes electromagnetic flow meters, Coriolis flow meters, temperature sensors and pressure sensors. He has spent the past years turning customer pain points into innovative sensing and measurement solutions. Given Anderson-Negele’s global 90+ year focus in the hygienic industry Ryan also has a vast knowledge of hygienic/sanitary design standards and requirements that apply to sensors primarily used in the Food & Beverage and Life Science industries. After completing a BS in Mechanical Engineering at Clarkson University Ryan joined the Team at Anderson-Negele in Fultonville NY. Ryan has developed technical product and application knowledge throughout his career through roles in design and application engineering. A passion for understanding and solving customer problems led Ryan to his current position as product manager at Anderson-Negele.
read more read less
Erik Tiemensma

Bronkhorst High-Tech B.V.

Ask a question

Erik Tiemensma, Sales Knowledge Manager, has over 20 years of experience in flow and pressure measurement and control for gas, liquid and vapour. For many years Erik worked as Sales Engineer supporting worldwide sales channels in finding the best solutions for customers’ applications. At Bronkhorst we are convinced that sharing experiences and knowledge is an added value for customers, when discussing the most suitable products for their applications. As part of this expert panel, looks forward to your challenging flow or pressure questions.
read more read less
Jan Christensen

Brooks Instrument

Ask a question

Jan Christensen has nearly 40 years of experience in precision flow and pressure control instrumentation. He began his career as a Canadian Service Specialist where he traveled out to the field and repaired valve instrumentation and control systems. Now with 35 years at Brooks Instrument, he assumes the role of Regional Manager. As a Regional Manager he is responsible for the northern part of the United States and Canada learning about the exciting projects our customers are working on and how Brooks Instrument can serve them. Jan has worked extensively in oil and gas, biotech, and semiconductor industries as a flow, technical, and application expert. He is a global traveler, fluent in Danish, German, and English, and has visited every continent except for Australia. Jan has a diploma in materials management from Seneca College and a diploma in electronics from Sheridan College. He also served in the Canadian Air Force for seven years where he learned about electronics specifically repairing radar.
read more read less
Dietmar Saecker

Endress+Hauser AG

Ask a question

Dietmar Saecker is temperature measurement expert at Endress+Hauser in Nesselwang, Germany. His experience covers technical sales support, consulting for difficult temperature measurement applications and international know-how transfers, especially in the Life Sciences industry. He also teaches at the Kempten University of Applied Sciences. Dietmar studied Chemical Engineering with a focus on measurement and control technology at the University of Dortmund. Experience from many customer visits has shown him that many problems arise from an incorrect choice of equipment. In lectures and training courses on temperature measurement technology, he demonstrates the complexity of the subject and regularly surprises numerous listeners with his thoughts and experiences. His recipe: “Recognizing trends and sharing knowledge. Because only when we share knowledge can we develop better solutions together.” Dietmar is looking forward to your questions and the exchange with you.
read more read less
Casey Williamson

GF

Ask a question

Casey Williamson is Head of Business Development Microelectronics Global Industries for Georg Fischer. For the last 25 years, he has provided support for the semiconductor and photovoltaic sub-segments; through the years, he has been instrumental in defining fab construction requirements as they apply to piping systems for the conveyance of high-purity liquids, process cooling, and chemical waste streams as well as analytical control systems to optimize the operations of UPW and waste systems.
read more read less
Francisco Hernandez

HRS Heat Exchangers

Ask a question

Francisco graduated as an industrial technical engineer at the Universidad Politécnica de Cartagena (Murcia, Spain) in 1993, and joined HRS in 1998. After a year as a design engineer, he focused on HRS’ food processing projects, developing, designing and commissioning large projects for customers. Throughout his professional career, Francisco has worked primarily within the food industry and has an in-depth understanding of its process nuances and requirements. In 2010, he was made Food Business Director for the HRS Group, supporting the sales teams’ engagements and customer requirements internationally across all of the HRS Group’s offices. Francisco’s extensive technical knowledge developed throughout his career as a design engineer, along with his ability to understand the unique needs of the client, have made him one of the top experts in the food processing industry.
read more read less
Gérard Bottino

Panametrics

Ask a question

Gerard joined Panametrics in 2008 as a Flow Product Specialist for the Europe, Middle East and Africa Regions and is now the Global Flow Commercial Development Leader. He started his career in 1990 in the process industry after receiving his MSc. Before joining Panametrics, Gerard had several technical and commercial roles with several industries. Subject Matter Expertise – Flow, field instrumentation and process industries
read more read less
Bob Steinberg

Sage Metering

Ask a question

Bob Steinberg is the founder, president, and CEO of Sage Metering. He has over 40 years of instrumentation experience. Before forming Sage Metering in 2002, Steinberg managed thermal mass flow meter sales at Kurz Instruments, Sierra Instruments, and Eldridge Products. While at Weston Instruments, he was a product marketing engineer. He has a BSEE and a BA from Rutgers University.
read more read less
Eric Heilveil

Siemens Industry, Inc.

Ask a question

Eric Heilveil is a 30-year plus veteran in the process instrumentation marketplace. He started out his career working for Emerson Electric and later moved on to work with his current employer Siemens Process Instrumentation Flow Division. Throughout his career in industrial flow measurement he has held positions as a field service manager, a field sales manager, application engineer, product line manager, sales and product trainer, among other roles. Eric has worked extensively in the semiconductor, biotech, water and wastewater, food and beverage, automotive, oil and gas, and chemical industries. His current position with Siemens is as a Product Marketing Manager for flow products. Eric holds a dual MBA in marketing and finance. Based in Harleysville, Pennsylvania, throughout his career Eric has been responsible for business development and marketing of the Coriolis, clamp-on ultrasonic, magnetic flow and vortex flow products. He has been expertly selling, managing, consulting, designing, training, marketing and writing about flow measurement and control products that serve industry for his entire career.
read more read less
Erik van den Bosch

Teledyne Gas & Flame Detection

Ask a question

A question on your Gas & Flame Detection needs ? Erik will guide you through the different solutions to protect your personnel and your site from anoxia, toxic or explosive hazards. Each application has its own set of fire, gas and safety hazards, which can vary not only from facility to facility, but also from area to area within the same facility. With more than 8 years of experience in the gas and flame industry, Erik knows it all and can consult with you to identify your specific needs, design an appropriate fixed gas detection system to meet those needs and ensure its proper installation and ongoing operation. You can contact Erik in Dutch, English or French, to discuss gas and flame detection applied to water treatment, refineries, breweries, car parks, tunnels, natural gas, food & beverage, steel, marine, freezing and many more… No application is too complicated, and no gas detection system better meets your need than those from Teledyne Gas and Flame Detection, manufacturer, equipment and service provider with production facilities based in Arras, France/ Renfrew, UK and Englewood, USA. Erik’s dedication to safety is backed by Teledyne’s global capability and manufacturing excellence, and you can be sure that he will provide expert judgment and premier technology that you can trust.
read more read less
Trevor Forster

Titan Enterprises Ltd

Ask a question

Trevor Forster is Managing Director of the internationally respected flowmeter company - Titan Enterprises Ltd. His experience in fluid handling dates back to the mid 1960's when he started working on rotating seals and flowmeter design for third party clients. Trevor draws upon his extensive experience of using innovative design and production techniques to produce elegant flow metering solutions for organisations around the globe. Titan Enterprises supply a range of off-the-shelf flowmeters, application-specific flowmeters & bespoke flow metering devices & solutions. Their flow sensors are designed to customer specifications & to meet specific flow ranges & environmental conditions.Titan are also a supplier of NSF-approved flowmeters for food & beverage applications.
read more read less
Natalie Waldecker

VEGA Grieshaber KG

Ask a question

Natalie Waldecker, Portfolio Manager Food and Pharma, knows the challenges of the demanding industries inside out. With her broad application knowledge, she is at home on topics such as hygiene design, certificates and cleanability. As product manager for pressure measurement technology, she is also responsible for one of the most important measuring principles for the industry. Natalie gathers her knowledge as close to the application as possible. Preferably directly at the customer’s site, experiencing “real world” practice. She has thus gotten thoroughly acquainted with international customer requirements and knows the ins and outs of the market. With this background, she is able to not only explain technical relationships in an understandable way, but also offer valuable tips and convincing solutions. In the 12 years she has been with VEGA, she has steadily improved her expertise which makes her the right person to contact for new product ideas and tailored customer solutions.
read more read less
Paul de Waal

Vögtlin Instruments GmbH

Ask a question

Paul de Waal is Dutch and educated as a Measurement and Control /Electronics Engineer. After a start as Instrumentation Engineer at Delta Controls, often outsourced to Shell, he became Managing Director of Sierra Instruments b.v. for almost 25 years. In 2012 he moved to the UK and now works as Business Development Director at Vögtlin Instruments GmbH in Switzerland. Paul has been active is several ISO committees and has a wide network of international relations that he can call upon to support him. (Vögtlin is part of the TASI group). He has practical experience with about every flow meter principle available. Currently his professional focus is application support, product development and international sales promotions. His main interest and experience lies in non-fiscal gas mass flow measurement/control systems and calibration. Gas mass flow meters and controllers used in applications like consumption measurements and distribution, gas dosing, mixing, (leak) testing, flame control, furnace, glass, heat treatment, packaging and analysers. Application for this can be found in industries like Food, Bio technology, Surface technologies, Welding, Medical, Pharma, Energy (Solar, Fuel cells, combustion, etc), chemical, semiconductor, metal industry and many more..
read more read less
Pascal van Putten

VPInstruments

Ask a question

Pascal van Putten, CEO at VPInstruments, has over 25 years of experience in energy monitoring for compressed air and industrial gases. With a background in engineering and a strong focus on sustainability, he founded VPInstruments to provide easy-to-use, reliable tools for measuring flow, pressure, power, dew point, and more. Under his leadership, the company has developed innovative products like the VPFlowScope flow meter series and the VPVision energy management system, now used in factories worldwide. Pascal believes that accurate measurement is the first step toward meaningful energy savings and carbon reduction. He regularly speaks at conferences and workshops, sharing insights on industrial energy efficiency. As part of this expert panel, Pascal looks forward to addressing your questions on compressed air monitoring and sustainable energy management.
read more read less