Equipment Guide
Valves start, stop, throttle and divert the flow of liquids, gases and slurries on command from a process controller. This directory lists specialist manufacturers and suppliers of ball, butterfly, gate, globe, plug, needle, diaphragm, solenoid, control, pressure control and safety valves, plus valve actuators and valve positioners.
Each company listed below is profiled with its product range, markets served and contact details.
Recommended manufacturers
Bronkhorst High-Tech B.V.
Bronkhorst High-Tech offers an extensive product range of thermal, Coriolis and ultrasonic flow meters and controllers. We offer numerous styles of both standard and bespoke instruments for applications in laboratory, machinery and industry and we closely cooperate with OEM’s in the field of customer specific designs for gas, liquid or vapour control.
Clarke Valve
Clarke Valve is the exclusive manufacturer of the Dilating Disk™ Valve, a next generation control valve. This advanced technology quarter-turn valve is characterized by its three interlocking petals that control the flow of process fluid. This patented stem-seal technology reduces fugitive emissions by 98% and records a methane leakage rate of only 2 PPM under the API 641 and ISO 15848-1 standards.
Emile Egger & Cie SA
Emile Egger & Cie SA is a medium-sized, independent and owner-operated Swiss industrial enterprise with a concentration on the development and manufacture of pumps and Iris® diaphragm control valves.
GF
GF is the leading flow solutions provider worldwide, enabling the safe and sustainable transport of fluids. The company specializes in plastic piping systems and system solutions plus services in all project phases.
Habonim
Habonim has over 75 years of experience, committing to engineering, manufacturing, and supplying superior products, while providing excellent personal service to our customers. We take pride in incorporating quality, innovation, reliability, and safety into our products.
Oliver Valves
Oliver Valves is a manufacturer of engineered-to-precision valves.
Siemens Industry, Inc.
Siemens Process Instrumentation offers innovative measurement solutions to increase plant efficiency and enhance product quality. Siemens extensive portfolio of process instruments for flow, level, pressure and temperature measurement, provides critical data that enables you to optimize your process, reduce energy consumption and ensure safety.
Butterfly valves are straightforward on/off routing valves with a substantial opening area and low flow resistance. They are an optimal solution in modern processing technology and ideal for use with low and medium-viscosity liquids. Butterfly Valves are valves that isolate or regulate the flow of a fluid. The closing mechanism is a disk that rotates. A butterfly valve is from a family of valves called quarter-turn valves. To make your selection easier, browse global manufacturers of butterfly valves for fluid handling here.
Recommended manufacturers for Butterfly Valves
Gate Valves (also known as Sluice Valves) are valves which open by lifting a rectangular or round wedge/gate out of the path of the fluid. The distinguishing feature of gate valves is that the sealing surfaces between the gate and seats are planar. Because of this gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. Gate valves are designed for fully open or fully closed service. They are installed in pipelines as isolating valves, and should not be used as control or regulating valves. Operation of a gate valve is performed doing an either clockwise to close (CTC) or clockwise to open (CTO) rotating motion of the stem. When operating the valve stem, the gate moves up- or downwards on the threaded part of the stem.
Recommended manufacturers for Gate Valves
As their name suggests, globe valves are linear motion valves with rounded globular shaped bodies. Globe valves, different from ball valve, are types of valves used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. Globe valves are manufactured in a variety of materials and styles some of which include corrosion resistant, pressure seal and cryogenic globe valves. Globe valves can be used in systems that require frequent stroking, vacuum, and systems that have a wide range of temperature extremes. Find manufacturers of Globe Valves in our Equipment Guide
Recommended manufacturers for Globe Valves
No manufacturers listed for this product yet.
Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. Plug valves (or cock or stop-cock valves or quater-turn valves) date back to ancient times, where they were developed for use in citywide Roman plumbing systems. Today, they remain one of the most widely used valves for both on/off and throttling services. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical. Plug valve design is fairly simple; the body is comprised of three main parts: body, cover, and plug.
Recommended manufacturers for Plug Valves
No manufacturers listed for this product yet.
Needle Valves are a type of valve having a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates. Needle valves are similar to globe valves. They’re used to start, stop, and regulate the flow rate within a pipeline. However, needle valves are designed differently. Unlike globe valves, which have a disc, needle valves have a long, tapered, needle-like point at the end of the valve stem. This is often referred to as the plunger. Find manufacturers of needle valves in our Equipment Guide.
Recommended manufacturers for Needle Valves
Control valves regulate the flow or pressure of a fluid. Control valves normally respond to signals generated by independent devices such as flow meters or temperature gauges. Control valves are normally fitted with actuators and positioners. Pneumatically-actuated globe valves and Diaphragm Valves are widely used for control purposes in many industries, although quarter-turn types such as (modified) ball, gate and butterfly valves are also used. Control valves can also work with hydraulic actuators (also known as hydraulic pilots). These types of valves are also known as Automatic Control Valves. Find manufacturers of control valves in our Equipment Directory.
Recommended manufacturers for Control Valves
Bronkhorst High-Tech B.V.
Bronkhorst High-Tech offers an extensive product range of thermal, Coriolis and ultrasonic flow meters and controllers. We offer numerous styles of both standard and bespoke instruments for applications in laboratory, machinery and industry and we closely cooperate with OEM’s in the field of customer specific designs for gas, liquid or vapour control.
Clarke Valve
Clarke Valve is the exclusive manufacturer of the Dilating Disk™ Valve, a next generation control valve. This advanced technology quarter-turn valve is characterized by its three interlocking petals that control the flow of process fluid. This patented stem-seal technology reduces fugitive emissions by 98% and records a methane leakage rate of only 2 PPM under the API 641 and ISO 15848-1 standards.
GF
GF is the leading flow solutions provider worldwide, enabling the safe and sustainable transport of fluids. The company specializes in plastic piping systems and system solutions plus services in all project phases.
Habonim
Habonim has over 75 years of experience, committing to engineering, manufacturing, and supplying superior products, while providing excellent personal service to our customers. We take pride in incorporating quality, innovation, reliability, and safety into our products.
Oliver Valves
Oliver Valves is a manufacturer of engineered-to-precision valves.
Diaphragm valves (also known as membrane valves) consist of a valve body with two or more ports, a diaphragm, and a “weir or saddle” or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal. Diaphragm valves are used on shut-off and throttling service for liquids, slurries and vacuum/gas.
Recommended manufacturers for Diaphragm Valves
Solenoid valves open and close electrically: a current through a coil moves a plunger that lifts the seal off its seat, so the valve can be switched by a controller without any operator or air supply. Direct-acting and pilot-operated versions, in two-way, three-way and four-way configurations, are used for dosing, batching, cooling and pneumatic control in almost every process industry. Find global manufacturers of solenoid valves in our Equipment Guide.
Recommended manufacturers for Solenoid Valves
Ball valves control flow with a rotating sphere carrying a bore through its centre, which gives a tight shut-off and a full port with almost no pressure drop when open. A quarter turn takes them from fully open to fully closed, so they are quick to operate and easy to automate. Floating and trunnion-mounted designs serve everything from utilities to high-pressure oil and gas service. Find global manufacturers of ball valves in our Equipment Guide.
Recommended manufacturers for Ball Valves
Habonim
Habonim has over 75 years of experience, committing to engineering, manufacturing, and supplying superior products, while providing excellent personal service to our customers. We take pride in incorporating quality, innovation, reliability, and safety into our products.
Oliver Valves
Oliver Valves is a manufacturer of engineered-to-precision valves.
Actuators supply the force that opens, closes or modulates a valve on command from the control system. Pneumatic actuators dominate process plants because they are fast, powerful and fail-safe on air loss; electric actuators suit precise positioning and sites without an air supply; hydraulic actuators handle the highest torques. Sizing depends on valve torque, safety position and available supply pressure. Find global manufacturers of valve actuators in our Equipment Guide.
Recommended manufacturers for Actuators
Clarke Valve
Clarke Valve is the exclusive manufacturer of the Dilating Disk™ Valve, a next generation control valve. This advanced technology quarter-turn valve is characterized by its three interlocking petals that control the flow of process fluid. This patented stem-seal technology reduces fugitive emissions by 98% and records a methane leakage rate of only 2 PPM under the API 641 and ISO 15848-1 standards.
GF
GF is the leading flow solutions provider worldwide, enabling the safe and sustainable transport of fluids. The company specializes in plastic piping systems and system solutions plus services in all project phases.
Habonim
Habonim has over 75 years of experience, committing to engineering, manufacturing, and supplying superior products, while providing excellent personal service to our customers. We take pride in incorporating quality, innovation, reliability, and safety into our products.
Pressure control valves hold pressure at a set value regardless of what happens upstream or downstream. Pressure reducing valves protect equipment by capping the pressure delivered to it, while back pressure and pressure sustaining valves maintain a minimum pressure in the line ahead of them. Direct-acting versions work without an external supply; pilot-operated versions give tighter control at higher capacities. Find global manufacturers of pressure control valves in our Equipment Guide.
Recommended manufacturers for Pressure Control Valves
Clarke Valve
Clarke Valve is the exclusive manufacturer of the Dilating Disk™ Valve, a next generation control valve. This advanced technology quarter-turn valve is characterized by its three interlocking petals that control the flow of process fluid. This patented stem-seal technology reduces fugitive emissions by 98% and records a methane leakage rate of only 2 PPM under the API 641 and ISO 15848-1 standards.
GF
GF is the leading flow solutions provider worldwide, enabling the safe and sustainable transport of fluids. The company specializes in plastic piping systems and system solutions plus services in all project phases.
Habonim
Habonim has over 75 years of experience, committing to engineering, manufacturing, and supplying superior products, while providing excellent personal service to our customers. We take pride in incorporating quality, innovation, reliability, and safety into our products.
Oliver Valves
Oliver Valves is a manufacturer of engineered-to-precision valves.
Valve positioners compare the control signal with the actual stem position and adjust the air to the actuator until the two match, which removes the effect of friction, packing wear and varying process pressure. Smart digital positioners add diagnostics on travel, cycles and dead band over HART, Profibus or Foundation Fieldbus, turning a control valve into a source of predictive maintenance data. Find global manufacturers of valve positioners in our Equipment Guide.
Recommended manufacturers for Valve Positioners
GF
GF is the leading flow solutions provider worldwide, enabling the safe and sustainable transport of fluids. The company specializes in plastic piping systems and system solutions plus services in all project phases.
Siemens Industry, Inc.
Siemens Process Instrumentation offers innovative measurement solutions to increase plant efficiency and enhance product quality. Siemens extensive portfolio of process instruments for flow, level, pressure and temperature measurement, provides critical data that enables you to optimize your process, reduce energy consumption and ensure safety.
Safety valves protect vessels, pipework and people by opening automatically when pressure rises above a set point, then reseating once the system returns to normal. Spring-loaded and pilot-operated designs are sized to the relieving capacity required and are certified to codes such as ASME VIII, API 526 and PED. Because they are the last line of defence, testing and set-pressure verification are part of routine plant maintenance. Find global manufacturers of safety valves in our Equipment Guide.
Recommended manufacturers for Safety Valves
No other manufacturers for this product.
Erik Tiemensma, Sales Knowledge Manager, has over 20 years of experience in flow and pressure measurement and control for gas, liquid and vapour. For many years Erik worked as Sales Engineer supporting worldwide sales channels in finding the best solutions for customers’ applications. At Bronkhorst we are convinced that sharing experiences and knowledge is an added value for customers, when discussing the most suitable products for their applications. As part of this expert panel, looks forward to your challenging flow or pressure questions.
Kyle Daniels, CEO, is an Aerospace Engineer and the inventor, Chief Engineer, and Head of Product Design of the Dilating Disk Valve™, formerly known as the Shutter Valve™. He holds several patents on the Dilating Disk™ Valve, and is an expert in the field of industrial valves. Mr. Daniels spent his career in the aerospace industry working at General Electric, Pratt & Whitney, and Embraer Aircraft. He is a graduate of The Ohio State University’s prestigious Aeronautical and Astronautical Engineering program and received a master’s degree (magna cum laude) from Brown University’s Program in Innovation Management and Entrepreneurship. Mr. Daniels is from Miami, FL and has resided in Ohio, Connecticut, Rhode Island and Paris, France.
Casey Williamson is Head of Business Development Microelectronics Global Industries for Georg Fischer. For the last 25 years, he has provided support for the semiconductor and photovoltaic sub-segments; through the years, he has been instrumental in defining fab construction requirements as they apply to piping systems for the conveyance of high-purity liquids, process cooling, and chemical waste streams as well as analytical control systems to optimize the operations of UPW and waste systems.
Eldad Ohayon is an experienced product management and business development professional with over 15 years of experience in industrial valves and fluid control solutions.
October 26, 2026
GF is expanding its data center liquid cooling infrastructure portfolio with the introduction of the Multi Control Valve, an all-in-one polymer flow…
Read moreOctober 21, 2026
Schubert & Salzer Control Systems is adding new variants to its low flow valves for demanding high-pressure applications. Thanks to various actuator…
Read moreOctober 21, 2026
Following the October 1 introduction of VSH as the dedicated brand for press fittings and connection technology, Aalberts integrated piping systems Americas…
Read more
